https://www.youtube.com/watch?v=ZjAHqHIGG1s [QUOTE]---------------------------------------WARNING---------------------------------------- 1 = Security level 1 Samsung Update If the device is in a high level security update, the rom must be at the same level of security.- How To Download Samsung Official Firmware 4 Files = link in DESCRIPTION - How To Download Rom "COMBINATION" = ? You can comment under this video include. Model number & Security level your device will provide the corresponding Rom.
[/QUOTE]
חייב לצרוב קובץ combintion עם אותו security code אם זה 1 .2 .3 .4 ... ואז להפעיל usd dubbugging לשים את הטלפון שוב במצב צריבה והפעם כשיש את כל 4 או 5 הקבצים עם אותו security code צורבים רק את BL AP CP לא שמים יש לצפות בסרטון HOME CSC
bypass/remove Mi account Xiaomi Redmi Note 4 Note 4X MTK DEAD After Flash !!Solved
Xiaomi Redmi Note 4 Note 4X MTK stuck in bootloop
solved ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xC002002A) - cuz by cust.img file (flash the rom in the end of the page and this will work with sp flash tool)
Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings
Solution:
Ensure that the file(s) you're trying to flash are actually for your exact phone model
Ensure you tick the boxes for only the files present in the ROM you're about to flash
Probably have the wrong driver installed. Uninstall vcom, preloader and MTK drivers using usb deview then manually re-install using https://forum.hovatek.com/thread-440.html
Delete the sp flash tool folder then re-extract
Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
If that doesn't work, keep holding down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
Consider using the latest version of Sp Flash tool
Format the phone before trying to flash the file(s) again
install mtk driver from links
make sure the phone is turn off
load scatter file to sp flash tool
first do format from sp flash tool prest start - phone turn off and press vol down and connect the usb then you will see the bar load in the buttom line
now press download from rom files and the scatter - phone turn off and press vol down and connect the usb then you will see the bar load in the buttom line
and thats it andd down the phone will turn on like new and without the mi account and Frp
after phone boot and all work there is one more problem you can see invalid imei to solved this problem you need to use the tool call MauiMETA from MEGA link
*** אם מקבלים הודעת שגיאה של הרישיון לא חוקי יש להתקין את קובץ apk שלמעלה ***
הורדה בלי GIFT זה גרסה רגילה בלי המבצע של הGIFT שתי ההורדות אותו הדבר אבל עם packagename אחר com.nng.igoprimoisr.javaclient גירסה של GIFT מכילה packagename אחר כי זה GIFT
Enable Talkback Power & UP 2 second - (for disable - power & up both once) ⅃ - Use voice commend
Say assistant Press on the home icon
Bixby settings
Press update bixby - but do not update bixby update galaxy store - Ok Press again on bixby update - when its opened at the store just press back and install some launcher and open settings Accessibility - advanced settings - accessibility - button - navigation button & select action (Color inversion)
Restore data (backup) - and at the same time click on the accessibility icon in the navigation bar for dismiss the update option
15. Once found, click on it, 'Clear Data' and then 'Disable' it.
16. Go back to Google now and search for QuickShortMaker.
17. Install it and open it. (You may need to use ES File Explorer to be able to navigate to it and open it.)
18. Within 'QuickShortMaker' > 'Incremental search' > 'Activities'; search for "Setup Wizard". It should be near the bottom. There are lots of setup wizards once you find it so pay close attention to specifics here.
19. Select the one with ".setupwizards.SetupExitActivity". (It's near the bottom of that particular screen but again, you need to pay attention to the small print and ensure you select the right one.)
20. Once you find it, select 'Create'.
21. Done! You can now restart your phone and after you select your language, then connect to WiFi, you will bypass Samsung Account and gain full access to your phone.
After this you can go and check that there is no Samsung account displayed (i.e. Settings > Accounts). There won't be, but you won't be able to add one at this point either....
1. Go back to Package Disabler Pro and re-enable the "Samsung Account" option.
2. Go to Storage (Settings > Storage) and clear all cache.
3. Go to Find my Mobile (Settings > Lock screen and security > Find my Mobile) and from there you should be prompted to insert your Samsung Account details to successfully add your Samsung account.
4. Once completed, you can either choose to do a Factory data reset (from within 'Settings' > 'Backup and reset'. NOT from recovery. Or you can simply restart your phone if you don't need a factory reset and you should be good to go.
5. Done, now you should have your Samsung account registered to your phone and can sync with your account.
#2
clean data samsung account & disable it
now restart the phone and do the first steps of installtion
may work at android 5
create contact in phone and 3 dots or options to access to share option and then you will have option to Samsung share and you will see some apps click one one of it and it will ask to open it with Samsung store ok enter your username and password of your account once you log in to store just download ES file explorer
and after that you can use apps tools to bypass your lock
at the language screen press with 2 fingers and it will open - talkback > youtube > share > note -add imagefrom gallery press the V and share to MAPS set to go and you will see in the right corner the speaker > said said OPEN FILES > and use OTG with quickshortmaker to install and open choose the HUAWEI HOME log in to home screen
settings and buid number to enter to DEV and ENABLE USB DUBBGING and OEM UNLOCK go back and reopen the USB DUBBGING to check all is checked USB DUBBGING may not check but if its not check leave it like this and choose RESET and reset all with the internal storage
huaweihard reset / safe mode
huawei p20/p30 pro frp safe mode - All HUAWEI 2019 FRP/Google Lock Bypass Android/EMUI 9.1.0 WITHOUT PC | Unlock Device to Continue
#1 option # if you see the upper screenshot without android logo in the center of the screen - press HOME BUTTON until you see the screen with the android logo if its work you can press now HOME + POWER + VOL DOWN
#2 option #
if you see the issue screen without android logo in the center of the screen and the long press on the home button method not working try this press power + vol down when the screen turn off and phone do restart press imidediately HOME + POWER + VOL DOWN
and you will see phone in download mode if its not working try several times #3 option #
press HOME + POWER + VOL DOWN and hold them for faw seconds if not work try to do press power + vol down to restart the phone and try again
and you will see phone in download mode #4 option #
press POWER + VOL DOWN and press multiply times on HOME button and if you see the logo in the centerpress HOME + POWER + VOL DOWN
and you will see phone in download mode
mm phone not allowed for voice mm phone not allowed #update phone to latest version # check with other carrier sim # make sure you have IMEI # make sure your phone is not in blacklist # use unlock with chimera tool if you receive in the end of the process master unlock code / network unlockcode- open dialer and enter this code #7465625*638*# and here enter thenetwork unlockcode / master unlock code #patch certificate - root & OEM enable # try to flash modem to check the security code U1/2/3... - S1/2/3... mm phone not allowed for voice mm phone not allowed # update phone to latest version # check with other carrier sim # make sure you have IMEI - the correct one # make sure your phone is not in blacklist # use unlock with chimera tool if you receive in the end of the process master unlock code / network unlock code - open dialer and enter this code #7465625*638*# and here enter the network unlock code / master unlock code # patch certificate # try to flash modem to check the security code U1/2/3... - S1/2/3... need patch certificate - need ROOT & OEM ROOT new rom download - flastwrp boot to os reboot to recovery try first -boot to download flash again twrp and boot to twrp - try first read only wipe, format, data, yes reboot, recovery - do not install twrp swipe install, no files need to transfer to phone, make sure the device recognize in device manager - 1-magisk latest - 2-samsung-antiroot-removal-4.1 reboot system - do not install twrp - will take time to boot DO backup backup/store backup - will backup boot, efs, cpefs, modem, param, recovery, steady, parsistent, misc make sure OEM is enable& then do patch certificate
How to Install Minimal ADB and Fastboot on Windows:
Your device must be plugged into your computer
You must have USB Debugging enabled under Developer Options (Note: This may be listed as ADB Debugging on some ROM’s)
You have installed the necessary drivers and your computer is recognizing your device
Follow the Installers instructions and select where you would like to install Minimal ADB and Fastboot tool (For simplicity I choose to install it to the Desktop)
After you have chosen where to install Minimal ADB and Fastboot too select whether you would like to create a Start Menu Folder or not for the installation
Once you have chosen where to install it to and if you want to create a Start Menu Folder select the install option
After the Installation Wizard has completed you can select to start Minimal ADB and Fastboot
You can also start Minimal ADB and Fastboot by navigating to the Start Menu Folder you choose to create during installation or the desktop shortcut you choose to create and selecting Minimal ADB and Fastboot
You should now see a command window open, with the command window open you can now issue ADB and Fastboot commands to your device
How to Remove SAMSUNG FRP via ADB Command:
Download Combination file or adb enabled boot file for you cellphone from z3x server, or where ever you want.
Edit combination file and flash sboot.img only from you combination file via Odin or any device allows you to skip partitions from md5 firmware, I recommend use z2x box for this.
Flash only tar (adb enabled file) or sboot.img from .md5 combination file.
In some cases we need to flash complete combination file, so it’s depends on your cellphone model.
Your Samsung phone should have adb enabled now.
Connect phone to pc and install adb drivers if needed.
Press and hold [Shift] key on keyboard and right click anywhere at empty area in adb folder
You will have open command window here or open PowerShell here.
Click on command window (You need to enter cmd command if you are using windows 10 and have Open PowerShell window here)
Execute this command to bypass Google account verification screen: adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1 Some times you will not receive and ok message in command window but if you have adb access to your phone it will work. Please visit this post “Samsung Android 7.0 FRP Remove [No Box Required]” this can conform no response message in command window but phone activated.
If above command not work in your case you can try command written below. This will take you to login screen and then you can enter you new Google account.
adb shell am start -n com.google.android.gsf.login/
If both previous commands not working then try this.
adb shell am start -n com.google.android.gsf.login.LoginActivity
The method written above should work perfectly, If you have any problem please write in comments below i will try to answer as soon as possible.
How to remove FRP Via Fastboot Command?
In most of Qualcomm and other Android phones you will have fastboot option. So with commands written below you can also remove frp via fastboot.
Enter your cellphone to Fastboot mode
Open ADB and Fastboot Terminal as described above.
Enter command written below.
This will Wipe your cellphone
fastboot -w
If Above Command not works, then use this command this will delete user configurations on your cellphone
fastboot erase config
If Above Command not Working Then use this command
fastboot -i 0x2a96 erase config
Remove FRP From SPD and MTK Based Android Phones?
Go to Setting using This Method. XT1254 FRP Solution or any other witch allows you to enable usb debugging.
Enable USB Debugging from Setting.
Open ADB and Fastboot Terminal as described above.
